PosiTest F/FM/G/GM Coating Thickness Gage

Accurate

• Certificate of Calibration showing traceability to PTB included with every gage
• Matching Calibration Standards and Procedures available for every model
• Highly wear resistant Carbide Probe for longest life and continuous accuracy
• Remove center of dial cover for easy calibration adjustment
• Conforms to national and international standards

Durable

• Extra rugged housing, not affected by mechanical shock, water, acid or solvents
• Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
• Can be used fully supported or with only the front probe area contacting the surface
• Functions on a permanent rare-earth cobalt magnet
• No batteries/electronics
• 2 year warranty

 Easy To Use

• Positive visual and audible indicators to designate when
  thickness reading is established
• “V” grooves in probe housing and Gage base allow correct
  positioning on cylindrical objects
• Compact, lightweight, precisely balanced, independent of
  gravity – can be used in any position
• GO/NO-GO button can be pre-set for rapid measurement
• Probe contact and dial rotation all in a one-finger operation
• Furnished with wrist strap and instructions in a high quality
  leather case with belt loops for your convenience

Four Models (FM, F, GM, G)

For: Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel. Scale FM 0-80 mils Tolerance: ±0.2 mils up to 4 mils ±5% of the reading over 4 mils For: Electroplating, thin paint films, phosphating on steel. Scale GM 0-8 mils Tolerance: ±0.04 mils up to 0.8 mils ±5% of the reading over 0.8 mils Scale F 0-2000 µm Tolerance: ±5 µm up to 100 µm ±5% of the reading over 100 µm Scale G 0-200 µm Tolerance: ±1 µm up to 20 µm ±5% of the reading over 20 µm