Magnaflux Demagnetization Equipment

Magnaflux demagnetization units remove any residual magnetism remaining after conducting Magnetic Partcle Inspection.  Demagnetization of ferromagnetic parts and materials often requires a requisite to final finishing or to ready an item for its ultimate use.

Industrial demagnetizing is not an easy task, unless an effective demagnetizing system is used. It is especially difficult when the magnetic field must be reduced to a very low level. Compact in size and ruggedly built, Magnaflux Demagnetization equipment offers a fast and efficient method for demagnetizing a broad variety of part types and sizes.

SB-2824 Stand Alone Demag Unit Datasheet
SB-1416 Stand Alone Demag Unit Datasheet
S-1212 Demag Unit Datasheet
S-66 Demag Unit Datasheet

Category:

We pride ourselves in providing fast deliveries. However inventory changes rapidly and on occasion some items may not be in stock. If you require an expedited shipment, please contact us via e-mail or call our office to confirm availability of an item. *Nominal lead times vary by product.

Product Information

Typical Applications for Demag Units

  • Demagnetizing parts that have been subjected to Magnavis and Magnaglo magnetic particle inspection
  • Removing residual magnetism in parts intended for use near magnetic instrumentation
  • Demagnetizing parts with bearing or journal surfaces
  • Demagnetizing parts after contact with magnetic chucks or lifting magnets

S-Series

These table-top demagnetizers come in three sizes:

  • S-66: 6 x 6 in / 15 x 15 cm with 4,000 Amp turns
  • S-1212: 12 x 12 in / 30 x 30 cm with 7,500 Amp turns
  • S-1515: 15 x 15 in / 39 x 39 cm with 8,500 Amp turns

S-66 Demagnetizing Coil

The Magnaflux S-66 Demagnetization Coil is a compact tabletop unit designed to be conveniently integrated into existing mag particle inspection systems. Oil and waterproof by virtue of its plastic-impregnated glass coating, the S-66 can be flush mounted to the work surface with supplied angle supports to facilitate easy part insertion by the operator.

Dimensions: 15.5”L x 9.4”W x 14.4”H (39.4cmL x 23.9cmW x 36.6cmH)

General Specifications:

  • Elec. Requirements:
    • 115V – 12 amp
    • 230V – 6 amp
    • 460V – 3 amp
  • Opening Size – 6” x 6” (15.2cm x 15.2cm)
  • Shipping Weight – 85 lb. (38.6kg)

S-1212 Demagnetizing Coil

The Magnaflux S-1212 Demagnetization Coil is a compact tabletop unit designed to be conveniently integrated into existing mag particle inspection systems. Oil and waterproof by virtue of its plastic-impregnated glass coating, the S-1212 can be flush mounted to the work surface with supplied angle supports to facilitate easy part insertion by the operator.

Dimensions: 24”L x 11.8”W x 24”H (61cmL x 30cmW x 61cmH)

General Specifications:

  • Elec. Requirements:
    • 230V – 30 amp
    • 460V – 14 amp
  • 7,500 Amp Turns
  • Opening Size – 12” x 12” (30.5cm x 30.5cm)
  • Shipping Weight – 285 lb. (129.3kg)

S-1515 Demagnetizing Coil

The Magnaflux S-1515 Demagnetization Coil is a compact table-top demagnetization system that is waterproof and oilproof by virtue of its plastic-impregnated glass coating. The S-1515’s compact size fits into most existing test or production systems – the base of the coil opening may be mounted flush with the work surface using the angle support supplied, making part insertion fast and easy on the operator.

General Specifications:

  • Available Voltages:
    • 460V
  • 8,500 Amp Turns
  • Opening Size – 15” x 15” (39cm x 39cm)

SB-Series

These stand alone, intermittent duty demagnetizers come in two sizes:

  • SB-1416: 14 x 16 in / 35 x 40 cm with 8,000 Amp turns
  • SB-2824: 24 x 28 in / 61 x 71 cm with 8,000 Amp turns

SB 1416 and SB 2824 Stand Alone, Intermittent Duty Demagnetizers

Typical Applications

  • Demagnetizing parts that have been subjected to Magnavis and Magnaglo magnetic particle inspection
  • Removing residual magnetism in parts intended for use near magnetic instrumentation
  • Demagnetizing parts with bearing or journal surfaces
  • Demagnetizing parts after contact with magnetic chucks or lifting magnets

Standard Featues

  • 8000 Amp Turns
  • SB 1416 14″ wide x 16″ high window; SB 2824 28″ wide x 24″ high window
  • User friendly control panel with one touch demag
  • Adjustable shot time

Specifications

  • SB 1416 Size: 30″L x 45″W x 57″H (76cm x 114cm x 148cm); SB 2824 Size: 30″L x 57″W x 64″H (76cm x 145cm x 163cm)
  • SB 1416 Weight: 460 lb. (208kg); SB 2824 Weight: 810 lbs. (367.4kg)
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power

Optional Features

  • 12,000 Amp output version (50% higher)
  • Track and Carriage
Resources

Similar Products