Krautkramer USN 60/60 L Flaw Detector

The GE USN 60 series ultrasonic flaw detectors have been optimized for use in direct sunlight and operation at extreme temperatures. These characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time. Depending on the applications challenges, you have the choice between the USN 60 and the USN 60L version.

We pride ourselves in providing fast deliveries. However inventory changes rapidly and on occasion some items may not be in stock. If you require an expedited shipment, please contact us via e-mail or call our office to confirm availability of an item. *Nominal lead times vary by product.

Product Information
  • Rugged USN durability
  • 11 hours of battery operation
  • Fast rotary knob operation
  • Outstanding ultrasonic performance
  • Extreme temperature use (-20°C to +55°C /-4°F to 130°F)
  • Hi-resolution color LCD
  • 4 selectable vibrant display color schemes to match lighting conditions
  • Gates and gate functions color coded for easy identification
  • Simple operation with fast rotary knob adjustments
  • Auto CAL makes calibration fast & easy
  • PRF (pulse repetition frequency) in spike mode:  USN 60 = 15 Hz to 6 kHz; USN 60L = 15 Hz to 2 kHz
  • 2 independent gates monitor amplitude and sound path distance for both flaw detection and thickness measurement applications
  • 250 KHz to 25 MHz frequency range
  • RF display mode enhances signal evaluation and bond inspection of dissimilar materials
  • 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance
  • 1 mm to 28 m (0.040” to 1100”) range (in steel) covers thin to lengthy acoustically clean materials; USN 60L range is 0.040” to 480” (1 mm to 12 m)
  • dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A when activated
  • VGA Output provides an easy way to connect to a PC monitor or PC projector
  • IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications
  • RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis
  • BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring

Related Accessories