EV6000 MG Kit – LED UV Fluorescent MPI Testing Kit

The Magnaflux EV6000 MG Kit is a convenient collection of Magnaflux’s portable, hand-held EV6000 LED UV lamp with fluorescent magnetic particles in easy-to-use aerosol form.

Each testing kit comes with 14AM oil-based fluorescent magnetic particle suspension, SKC-S cleaner/remover, SCRUBS® hand cleaner towels, a DYKEM® Brite-Mark yellow paint marker and a shop cloth.

**DISCONTINUED**

EV6000 UV LED Black Light Datasheet

SKU: 626779 Category:

We pride ourselves in providing fast deliveries. However inventory changes rapidly and on occasion some items may not be in stock. If you require an expedited shipment, please contact us via e-mail or call our office to confirm availability of an item. *Nominal lead times vary by product.

Product Information

The EV6000 MG Kit is portable and great for job sites or field inspections to detect very fine to fine discontinuities, check critical applications, after secondary processing, in-service inspections, testing high strength alloys and many other applications.

Comes with:

  • EV6000 LED UV lamp
  • 14AM, 2 aerosol cans
  • SKC-S, 2 aerosol cans
  • SCRUBS® hand cleaner towels, 3 towels
  • DYKEM® Brite-Mark yellow paint marker, 1 pen
  • Shop Cloth, 1 towel

Benefits & Features

  • Pre-packaged set of products provides everything needed for wet method fluorescent magnetic particle testing
  • Clear, bright indications
  • High sensitivity magnetic particles
  • EV6000 has a 9 in / 23 cm wide, uniform circular beam
  • Convenient carrying case

Specifications / Standards

  • ASTM E2297
  • ASTM E3022
  • ISO 3059
  • RRES 90061
  • ASTM E3022

Applications

Defect location: surface and slightly subsurface

Ideal for:

  • Detecting very fine to fine discontinuities
  • Critical applications
  • After secondary processing
  • In-service inspections
  • High strength alloys

Defect examples:

  • Inclusions
  • Seams
  • Shrink cracks
  • Tears
  • Laps
  • Flakes
  • Welding defects
  • Grinding cracks
  • Quenching cracks
  • Fatigue cracks

Use Recommendations

NDT Method: Magnetic Particle Testing, Fluorescent, Wet Method

Suspension Vehicle: Carrier II (petroleum distillate)

Required Equipment: Magnetizing device

Temperature Range: 55 to 120°F / 13 to 49°C

Recommended Accessories:

  • UV-A Meter                   PN 625024
  • Visible Light Meter         PN 622338
  • UV-A Safety Glasses     PN 506249
Resources

Similar Products